Gamma lance e bocchelli per monitor
Discharge equipment for monitors
“LI”-Lancia idrica getto pieno - Full jet water branch pipe
“DLS”-Lancia schiuma - Foam branch pipe
“DLS/A”-Lancia schiuma autospirante – Self suction foam branch pipe

Bocchelli getto pieno/nebulizzato - Full jet / Fog nozzles

Materiali - Materials
AL – Lega leggera anodizzata | AL – Light anodized alloy |
BZ – Bronzo | BZ – Bronze |
SS – Acciaio inox AISI 304 o 316 | SS – Stainless steel AISI 304 or AISI 316 |
Connessioni - Connections
Fino a 5” filletata BSP-GAS-F | Up to 5” threaded BSP-GAS-F |
Oltre i 5” flangiata ISO PN 16 o ANSI #150 | Sizes larger than 5” Flanged ISO PN 16 or ANSI #150 |
Tutte le prove di gittata dei dispositivi di lancio sono state fatte con angolo di alzo pari 30° ed assenza di vento con acqua. La pressione che determina le portate e le gittate e misurata all’ingresso del dispositivo di lancio. Per ottenere gittate ad angolazioni diverse da 30°, vedere il grafico. Utilizzando schiumogeni di ultima formulazione di base FP, FFFP-AR, AFFF-AR i bocchelli e le lance non hanno perdite di gittata, utilizzando liqudi schiumogeni a base sintetici gli stessi possono avere una perdita di gittata del 20% circa
All throw distances reported at seperate datasheets of the equipment are referred to internal tests with, 30° inclination respecting to earth, with water and no wind conditions. The pressure values determine the flow rate and throw are measured at the inlet of equipment. To assume throw distances with different inclinations refer to graphic given below. New generation foam concentrates as FP, FPPP-AR and AFFF-AR are assuring almost same results with water while synthetic based foam concentrates may create loss of throw distance up to approximately 20%.
Relazione in % tra altezza e lungezza getto – Cross reference in % between jet height and length
